---

Section I.Chemical Product and Company Identification
    Chemical Name Chlorophosphoric Acid Bis(2,6-dimethylphenyl) Ester
    Portland OR
    Synonym        Bis(2,6-dimethylphenyl) Phosphorochloridate    
    Chemical Formula        C16H18ClO3P    
    CAS Number        81639-99-8    

---

Section II.        Composition and Information on Ingredients    
    Chemical Name        CAS Number Percent (%)        TLV/PEL        Toxicology Data    
    Chlorophosphoric Acid Bis(2,6-dimethylphenyl) Ester 81639-99-8 Min. 93.0 (T) Not available.        Not available.    

---

Section III. Hazards Identification
    Acute Health Effects        Corrosive to skin, eyes, and respiratory system. Liquid or spray mist may produce tissue damage, particularly in mucous    
    membranes of the eyes, mouth and respiratory tract. Skin contact may produce burns. Eye contact can result in corneal
    damage or blindness. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by
    coughing, choking, or shortness of breath. Corrosive materials may cause serious injury if ingested. Follow safe
    industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

---

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15    
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    Inhalation        If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or    
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    Ingestion        DO NOT INDUCE VOMITING. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing,    
    perform mouth-to-mouth resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a
    possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive.

---

Section V.        Fire and Explosion Data    
    Not available.
    May be combustible at high temperature.        Auto-Ignition    
    Flammability
    Flammable Limits
    Flash Points        Not available.    
    Not available.
    Combustion Products        These products are toxic carbon oxides (CO, CO 2), halogenated compounds, phosphates.    
    WARNING: Highly toxic HCl gas is produced during combustion.
    Fire Hazards
    Not available.
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    SMALL FIRE: Use DRY chemical powder.
    and Instructions        LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.    
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    Chlorophosphoric Acid Bis(2,6-dimethylphenyl) Ester

---

Section VI.        Accidental Release Measures    
    Spill Cleanup        Corrosive solid.    
    Instructions        Stop leak if without risk. DO NOT get water inside container. DO NOT touch spilled material. Use water spray to reduce    
    vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all sources of ignition.
    Consult federal, state, and/or local authorities for assistance on disposal.

---

Section VII. Handling and Storage
    Handling and Storage        CORROSIVE. Keep container dry. Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the    
    container and store in a dry, cool place. Avoid excessive heat and light. Do not breathe dust. Never add water to this
    Information
    product. Wear suitable protective clothing. If you feel unwell, seek medical attention and show the label when possible.
    Treat symptomatically and supportively.
    Always store away from incompatible compounds such as oxidizing agents.

---

Section VIII. Exposure Controls/Personal Protection
    Engineering Controls        Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below    
    recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
    airborne contaminants below the exposure limit.
    Personal Protection        Face shield. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a    
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Exposure Limits        Not available.    

---

Section IX. Physical and Chemical Properties
    Solubility
    Physical state @ 20°C        Solid.        Not available.    
    Not available.
    Specific Gravity
    Molecular Weight        324.74        Partition Coefficient        Not available.    
    Boiling Point        Not available.        Vapor Pressure        Not applicable.    
    Melting Point        52°C (125.6°F)        Vapor Density        Not available.    
    Not available.        Volatility        Not available.    
    Refractive Index
    Critical Temperature        Not available.        Odor        Not available.    
    Viscosity        Not available.        Taste        Not available.    

---

Section X.        Stability and Reactivity Data    
    Stability    

---

This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability        Avoid excessive heat and light.    
    Incompatibilities
    Reactive with oxidizing agents.

---

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Eye Contact. Ingestion. inhalation. Skin contact.
    Routes of Exposure
    Toxicity Data        Not available.    
    Chronic Toxic Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Acute Toxic Effects        Corrosive to skin, eyes, and respiratory system. Liquid or spray mist may produce tissue damage, particularly in mucous    
    membranes of the eyes, mouth and respiratory tract. Skin contact may produce burns. Eye contact can result in corneal
    damage or blindness. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by
    coughing, choking, or shortness of breath. Corrosive materials may cause serious injury if ingested. Follow safe
    industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Continued on Next Page
    Chlorophosphoric Acid Bis(2,6-dimethylphenyl) Ester

---

Section XII.        Ecological Information    
    Ecotoxicity        Not available.    
    Environmental Fate        Not available.    

---

Section XIII. Disposal Considerations
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissove or mix material with a
    Waste Disposal
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and locl regulations when disposing of the substance.

---

Section XIV. Transport Information
    DOT Classification        Class 8: Corrosive material    
    PIN Number
    Proper Shipping Name
    Corrosive solids, n.o.s.
    Packing Group (PG)        III    
    DOT Pictograms

---

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40    
    CFR 720.36 (C) for those products not on the inventory list:
    (EPA)
    (i) These products are supplied solely for use in research and development by or under the supervision of a technically
    qualified individual as defined in 40 CFR 720.0 et sec.
    (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
    supplied on an MSDS sheet.
    WHMIS Classification        CLASS E: Corrosive solid.    
    (Canada)
    EINECS Number (EEC) Not available.
    EEC Risk Statements        R34- Causes burns.    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A