---

Section I.Chemical Product and Company Identification
    Chemical Name        3-Chloro-2-hydroxypropyl Methacrylate    
    (stabilized with HQ)
    Portland OR
    Synonym        Methacrylic Acid 3-Chloro-2-hydroxypropyl Ester    
    C7H11ClO3
    Chemical Formula
    CAS Number        13159-52-9    

---

Section II.        Composition and Information on Ingredients    
    CAS Number Percent (%)        TLV/PEL        Toxicology Data    
    Chemical Name
    3-Chloro-2-hydroxypropyl Methacrylate        13159-52-9 Min. 85.0 (GC) Not available.        Not available.    
    (stabilized with HQ)

---

Section III. Hazards Identification
    Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
    Acute Health Effects
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Harmful if ingested or inhaled. Minimize exposure to this material. Severe overexposure can result in injury or death.
    Skin contact may result in sensitization. Always cover all exposed skin with an impermeable layer and use proper eye
    protection. A OSHA/MSHA approved dust and vapor respirator is required when working with this material.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

---

Section IV.        First Aid Measures    
    Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
    Eye Contact
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
    Inhalation
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    Ingestion        INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.    
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
    resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
    material was ingested; the absence of such signs, however, is not conclusive.

---

Section V.        Fire and Explosion Data    
    Not available.
    May be combustible at high temperature.        Auto-Ignition    
    Flammability
    Flash Points        Flammable Limits        Not available.    
    138°C (280.4°F).
    These products are toxic carbon oxides (CO, CO2), halogenated compounds.
    Combustion Products
    WARNING: Highly toxic HCl gas is produced during combustion.
    Fire Hazards
    Not available.
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media        SMALL FIRE: Use DRY chemical powder.    
    LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
    and Instructions
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    3-Chloro-2-hydroxypropyl Methacrylate
    (stabilized with HQ)

---

Section VI.        Accidental Release Measures    
    Spill Cleanup        Irritating material. Harmful material. Sensitizing material. Light sensitive material.    
    In case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and excercise caution. Use a
    Instructions
    shovel to put material into a convenient waste disposal container. Finish cleaning the spill by rinsing any contaminated
    surfaces with copious amounts of water. Consult federal, state and/or local authorities for assistance on disposal.

---

Section VII. Handling and Storage
    IRRITANT. HARMFUL. SENSITIZER. LIGHT SENSITIVE. Keep away from heat. Mechanical exhaust required. When not in
    Handling and Storage
    use, tightly seal the container and store in a dry, cool place. Avoid excessive heat and light. May polymerize on exposure to
    Information
    light. Do not breathe gas/fumes/ vapor/spray.
    Always store away from incompatible compounds such as strong oxidizing agents, acids, alkalis (bases), amines.

---

Section VIII. Exposure Controls/Personal Protection
    Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
    Engineering Controls
    threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.
    Splash goggles. Lab coat. Vapor respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
    Personal Protection
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Not available.
    Exposure Limits

---

Section IX. Physical and Chemical Properties
    Physical state @ 20°C        Liquid. (Clear, colorless to slightly pale        Solubility    
    Not available.
    yellow.)
    1.20 (water=1)
    Specific Gravity
    Molecular Weight        178.61        Partition Coefficient        Not available.    
    Boiling Point        108°C (226.4°F) @ 5mmHg        Vapor Pressure        Not available.    
    Melting Point        Not available.        Vapor Density        Not available.    
    1.48        Not available.    
    Refractive Index        Volatility    
    Critical Temperature        Not available.        Odor        Not available.    
    Not available.        Not available.    
    Viscosity        Taste    

---

Section X.        Stability and Reactivity Data    
    Stability    

---

This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability        Avoid excessive heat and light. May polymerize on exposure to light.    
    Incompatibilities        Reactive with strong oxidizing agents, acids, alkalis (bases), amines.    

---

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Eye Contact. Ingestion. Inhalation.
    Routes of Exposure
    Not available.
    Toxicity Data
    CARCINOGENIC EFFECTS : Not available.
    Chronic Toxic Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Acute Toxic Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the eye    
    is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
    occasionally, blistering.
    Harmful if ingested or inhaled. Minimize exposure to this material. Severe overexposure can result in injury or death.
    Skin contact may result in sensitization. Always cover all exposed skin with an impermeable layer and use proper eye
    protection. A OSHA/MSHA approved dust and vapor respirator is required when working with this material.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Continued on Next Page
    3-Chloro-2-hydroxypropyl Methacrylate
    (stabilized with HQ)

---

Section XII.        Ecological Information    
    Not available.
    Ecotoxicity
    Environmental Fate        Not available.    

---

Section XIII. Disposal Considerations
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a
    Waste Disposal
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and local regulations when disposing of the substance.

---

Section XIV. Transport Information
    DOT Classification        Not a DOT controlled material (United States).    
    PIN Number        Not applicable.    
    Proper Shipping Name        Not applicable.    
    Packing Group (PG)        Not applicable.    
    DOT Pictograms

---

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list.    
    (EPA)
    WHMIS Classification        On NDSL.    
    (Canada)
    EINECS Number (EEC)        Not available.    
    EEC Risk Statements        R20/21/22- Harmful by inhalation, in contact with skin and if swallowed.    
    R36/37/38- Irritating to eyes, respiratory system and skin.
    R42/43- May cause sensitization by inhalation and skin contact.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A