504-60-9 structure, C5H8

TRANS-1,3-PENTADIENE

CAS No.

504-60-9

Formula:

C5H8

Basic Info

Piperylene is a volatile, flammable hydrocarbon consisting of a five carbon chain with two double bonds. It is obtained as a byproduct of ethylene production from crude oil.
Piperylene is used as a monomer in the manufacture of plastics, adhesives and resins. Piperylene is colorless.

Formula
C5H8
Molecular Weight
68.117
Exact Mass
68.0626
LogP
1.7485
PSA
0
Synonyms

H2C=C=CHTMS

H2C=CH-CH=CH-CH3

allenyltrimethylsilane

pentadiene-1,3

1-trimethylsilylallene

penta-1,3-diene

1,3-Pentadiene

4-methyl-1,3-butadiene

Silane,trimethyl-1,2-propadienyl

expand collapse

Properties

Appearance & Physical State
colourless liquid
Density
0.683 g/mL at 25ºC(lit.)
Boiling Point
42ºC(lit.)
Melting Point
-87ºC(lit.)
Flash Point
<-30 °F
Refractive Index
n20/D 1.433(lit.)
Stability
Stable. Incompatible with strong oxidizing agents. Very flammable - note low flash point and low boiling point.
Storage Condition
Refrigerator
Vapor Density
2.4 (vs air)
Vapor Pressure
6.56 psi ( 20 °C)

Safety Info

RTECS
RZ2465000
Safety Statements
S16; S23; S26; S36; S62; S24/25
WGK Germany
3
Risk Statements
R11
RIDADR
UN 3295 3
Hazard Class
3.1
Packing Group
I
Hazard Codes

MSDS

SDS 1.0
expand collapse
Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 20, 2017

Revision Date: Aug 20, 2017

1.Identification

1.1 GHS Product identifier

Product name TRANS-1,3-PENTADIENE

1.2 Other means of identification

Product number -
Other names 4-methyl-1,3-butadiene

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Fuels and fuel additives
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Flammable liquids, Category 2

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Danger

Hazard statement(s)

H225 Highly flammable liquid and vapour

Precautionary statement(s)
Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P233 Keep container tightly closed.

P240 Ground and bond container and receiving equipment.

P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.

P242 Use non-sparking tools.

P243 Take action to prevent static discharges.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P370+P378 In case of fire: Use ... to extinguish.

Storage

P403+P235 Store in a well-ventilated place. Keep cool.

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
TRANS-1,3-PENTADIENE TRANS-1,3-PENTADIENE 504-60-9 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest. Seek medical attention if you feel unwell.

In case of skin contact

Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention if skin irritation occurs.

In case of eye contact

Rinse with plenty of water (remove contact lenses if easily possible).

If swallowed

Rinse mouth. Do NOT induce vomiting. Seek medical attention if you feel unwell.

4.2 Most important symptoms/effects, acute and delayed

Vapors may cause dizziness or suffocation; contact may irritate skin and eyes. (USCG, 1999)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Aliphatic hydrocarbons and related compounds/

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

WATER MAY BE EFFECTIVE.

5.2 Specific hazards arising from the chemical

Special Hazards of Combustion Products: Fire produces irritating and poisonous gases. Behavior in Fire: Will burn and produce irritating and poisonous gases. Container may explode in heat of fire. Vapor explosion hazard indoors, outdoors, or in sewers. Runoff to sewer may create fire or explosion hazard. (USCG, 1999)

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Remove all ignition sources. Evacuate danger area! Consult an expert! Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT wash away into sewer.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Separated from strong oxidants. Fireproof. Store in an area without drain or sewer access. Ventilation along the floor.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state colourless liquid
Colour Colorless liquid
Odour no data available
Melting point/ freezing point -87ºC(lit.)
Boiling point or initial boiling point and boiling range 42ºC(lit.)
Flammability Highly flammable.
Lower and upper explosion limit / flammability limit no data available
Flash point <--1.11°C
Auto-ignition temperature no data available
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility MISCIBLE WITH ALCOHOL, ETHER, ACETONE, BENZENE
Partition coefficient n-octanol/water (log value) log Kow= 2.44
Vapour pressure 6.56 psi ( 20 °C)
Density and/or relative density 0.683 g/mL at 25ºC(lit.)
Relative vapour density 2.4 (vs air)
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

HIGHLY FLAMMABLE, DANGEROUS FIRE RISK.The vapour is heavier than air and may travel along the ground; distant ignition possible.1,3-PENTADIENE may react vigorously with strong oxidizing agents. May react exothermically with reducing agents to release hydrogen gas. In the presence of various catalysts (such as acids) or initiators, may undergo exothermic addition polymerization reactions. May undergo autoxidation upon exposure to the air to form explosive peroxides. Violent explosions at low temperatures in ammonia synthesis units have been traced to the addition products of dienes and nitrogen dioxide [Bretherick, 5th Ed., 1995].

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

Can react vigorously with oxidizing materials.

10.6 Hazardous decomposition products

When heated to decomposition it emits acrid smoke and irritating fumes.

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

No biodegradation data regarding 1,3-pentadiene were located(SRC), however data on a similar compound, 1,3-butadiene are available(1-4). Laboratory studies employing pure bacterial cultures isolated from lake and soil samples were shown to degrade 1,3-butadiene to 1,2-epoxybutene, however it is not clear what the rate of degradation will be under environmental conditions(1-3). The biodegradation half-life of 1,3-butadiene in aerobic waters has been reported as 7 days and the half-life in anaerobic waters was reported as 28 days(4). These data suggest that 1,3-pentadiene will also undergo biodegradation under similar conditions(SRC).

12.3 Bioaccumulative potential

An estimated BCF of 15 was calculated for 1,3-pentadiene(SRC), using a log Kow of 2.44(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4 Mobility in soil

The Koc of 1,3-pentadiene is estimated as 500(SRC), using a log Kow of 2.44(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 1,3-pentadiene is expected to have low mobility in soil(SRC).

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN3295 IMDG: UN3295 IATA: UN3295

14.2 UN Proper Shipping Name

ADR/RID: HYDROCARBONS, LIQUID, N.O.S.
IMDG: HYDROCARBONS, LIQUID, N.O.S.
IATA: HYDROCARBONS, LIQUID, N.O.S.

14.3 Transport hazard class(es)

ADR/RID: 3 IMDG: 3 IATA: 3

14.4 Packing group, if applicable

ADR/RID: II IMDG: II IATA: II

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
TRANS-1,3-PENTADIENE TRANS-1,3-PENTADIENE 504-60-9 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Not Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 20, 2017
Revision Date Aug 20, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
MSDS
expand collapse
Name: Piperylene tech. 60% cis and trans isomers Material Safety Data Sheet
Synonym: 1,3-Pentadiene; 1-Methylbutadiene; Penta-1,3-diene; Pentadiene, 1,3
CAS: 504-60-9
Section 1 - Chemical Product   MSDS Name:Piperylene tech. 60% cis and trans isomers Material Safety Data Sheet
Synonym:1,3-Pentadiene; 1-Methylbutadiene; Penta-1,3-diene; Pentadiene, 1,3

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
504-60-9 Piperylene 60 207-995-2
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and skin.Lachrymator (substance which increases the flow of tears).
Potential Health Effects
Eye:
Vapors cause eye irritation. Lachrymator (substance which increases the flow of tears). Causes redness and pain. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin irritation. Causes redness and pain. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Possible aspiration hazard. May cause central nervous system depression. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. May cause effects similar to those described for ingestion. May cause dyspnea (difficult or labored breathing). Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Extremely flammable liquid and vapor. Containers may explode in the heat of a fire. May form explosive peroxides. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide. This material is lighter than water and insoluble in water. The fire could easily be spread by the use of water in an area where the water cannot be contained. Do NOT use straight streams of water.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
  Handling:
Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Use only in a chemical fume hood. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 504-60-9: Russia: 40 mg/m3 TWA Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Clear liquid
Color: APHA: 25 max
Odor: None reported.
pH: Not available.
Vapor Pressure: 450 mbar @ 20 deg C
Viscosity: Not available.
Boiling Point: 42 deg C @ 760.00mm
Freezing/Melting Point: -78 deg C
Autoignition Temperature: Not applicable.
Flash Point: -28 deg C ( -18.40 deg F)
Explosion Limits, lower: 1.00 vol %
Explosion Limits, upper: 7.00 vol %
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: .6830g/cm3
Molecular Formula: CH3CH=CHCH=CH2
Molecular Weight: 68.11

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 504-60-9: RZ2464000 LD50/LC50:
CAS# 504-60-9: Inhalation, mouse: LC50 = 1100 mg/m3/2H; Inhalation, mouse: LC50 = 9760 mg/m3/2H; Inhalation, rat: LC50 = 140 gm/m3/2H; Inhalation, rat: LC50 = 97200 mg/m3/4H.
Carcinogenicity:
Piperylene - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.1
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
USA RQ: CAS# 504-60-9: 100 lb final RQ; 45.4 kg final RQ

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 504-60-9: No information available.
Canada
CAS# 504-60-9 is listed on Canada's DSL List.
CAS# 504-60-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 504-60-9 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Spectrum

NMR Spectrum 1H NMR : Predict
expand collapse

Analysis Methods

Kovats' RI, non-polar column, isothermal
expand collapse
Column Shape
Capillary
Active Phase(℃)
SE-30
Retention index
521.
Temperature Control
130.
Method
isothermal
Comments
Column length: 100. m; Column diameter: 0.5 mm
Reference
Bredael, P.Retention indices of hydrocarbons on SE-30J. Hi. Res. Chromatogr. Chromatogr. Comm.1982, 5, 6, 325-328.
Kovats' RI, non-polar column, isothermal
expand collapse
Column Shape
Capillary
Active Phase(℃)
SE-30
Retention index
525.
Temperature Control
80.
Method
isothermal
Comments
Column length: 100. m; Column diameter: 0.5 mm
Reference
Bredael, P.Retention indices of hydrocarbons on SE-30J. Hi. Res. Chromatogr. Chromatogr. Comm.1982, 5, 6, 325-328.
Van Den Dool and Kratz RI, non-polar column, temperature ramp
expand collapse
Column Shape
Capillary
Active Phase(℃)
SPB-1
Retention index
526.
Temperature Control
Method
temperature ramp
Comments
30. m/0.32 mm/4. μm, He, 45. C @ 13. min, 5. K/min, 240. C @ 5. min
Reference
Larráyoz, P.Addis, M.Gauch, R.Bosset, J.O.Comparison of dynamic headspace and simultaneous distillation extraction techniques used for the analysis of the volatile components in three European PDO ewes milk cheesesInt. Dairy J.2001, 11, 11-12, 911-926.
Van Den Dool and Kratz RI, non-polar column, custom temperature program
expand collapse
Column Shape
Packed
Active Phase(℃)
SE-30
Retention index
515.
Temperature Control
Method
custom temperature program
Comments
Supelcoport; Chromosorb; Column length: 3.05 m; Program: 40C(5min) =&gt; 10C/min =&gt; 200C or 250C (60min)
Reference
Peng, C.T.Ding, S.F.Hua, R.L.Yang, Z.C.Prediction of Retention Indexes I. Structure-Retention Index Relationship on Apolar ColumnsJ. Chromatogr.1988, 436, 137-172.
Normal alkane RI, non-polar column, isothermal
expand collapse
Column Shape
Capillary
Active Phase(℃)
SE-54
Retention index
542.
Temperature Control
50.
Method
isothermal
Comments
N2; Column length: 40. m; Column diameter: 0.25 mm
Reference
Xieyun, H.Maoqi, C.Shiyan, Y.Gas Chromatographic analysis during the process of heptaldehyde production using 1-hexeneChin. J. Chromatogr.1996, 14, 4, 291-293.

Synthesis Route

Related Compound Information