benzyl alcohol

CAS No. 100-51-6

Formula: C7H8O
Basic Info

Benzyl alcohol is an aromatic alcohol with the formula C6H5CH2OH. The benzyl group is often abbreviated "Bn" (not to be confused with "Bz" which is used for benzoyl), thus benzyl alcohol is denoted as BnOH. Benzyl alcohol is a colorless liquid with a mild pleasant aromatic odor. It is a useful solvent due to its polarity, low toxicity, and low vapor pressure. Benzyl alcohol is partially soluble in water (4g/100mL) and completely miscible in alcohols and diethyl ether. The anion produced by deprotonation of the alcohol group is known as benzylate or benzyloxide.

Molecular Weight
Exact Mass


Benzyl alcohol

expand collapse

Appearance & Physical State
colourless liquid
Boiling Point
Melting Point
Flash Point
Refractive Index
Water Solubility
4.29 g/100 mL (20 ºC)
Storage Condition
Vapor Density
3.7 (vs air)
Vapor Pressure
13.3 mm Hg ( 100 °C)
Safety Info
Safety Statements
WGK Germany
Risk Statements
R20/22; R63; R43; R36/37/38; R23/24/25; R45; R40
HS Code
UN 1593 6.1/PG 3
Caution Statement
P261; P301 + P312 + P330; P304 + P340 + P312; P305 + P351 + P338
Hazard Codes
Hazard Declaration
SDS 1.0
expand collapse
Download/Modify | Technical supported by For US version, EU version (23 languages) and more, please refer to


According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017


1.1 GHS Product identifier

Product name benzyl alcohol

1.2 Other means of identification

Product number -
Other names Benzyl alcohol

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Food additives
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Acute toxicity - Oral, Category 4

Acute toxicity - Inhalation, Category 4

2.2 GHS label elements, including precautionary statements

Signal word


Hazard statement(s)

H302 Harmful if swallowed

H332 Harmful if inhaled

Precautionary statement(s)

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.


P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/…if you feel unwell.

P330 Rinse mouth.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P312 Call a POISON CENTER/doctor/…if you feel unwell.




P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification


3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
benzyl alcohol benzyl alcohol 100-51-6 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest. Refer for medical attention.

In case of skin contact

Remove contaminated clothes. First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Rinse mouth. Refer for medical attention .

4.2 Most important symptoms/effects, acute and delayed

Inhalation of vapor may cause irritation of upper respiratory tract. Prolonged or excessive inhalation may result in headache, nausea, vomiting, and diarrhea. In severe cases, respiratory stimulation followed by respiratory and muscular paralysis, convulsions, narcosis and death may result. Ingestion may produce severe irritation of the gastrointestinal tract, followed by nausea, vomiting, cramps and diarrhea; tissue ulceration may result. Contact with eyes causes local irritation. Material can be absorbed through skin with anesthetic or irritant effect. (USCG, 1999)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

Enhancement of elimination: Hemodialysis may enhance the elimination of benzyl alcohol and its metabolites and may also be useful to help correct severe metabolic acidosis. However, more cases involve prolonged repeated infusion, and the usefulness of dialysis in unknown.

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Foam, carbon dioxide, dry chem ...

5.2 Specific hazards arising from the chemical

This chemical is combustible.

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance.

6.3 Methods and materials for containment and cleaning up

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a POTW is acceptable only after review by the governing authority. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must meet Hazardous Material Criteria for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Separated from strong oxidants.Benzyl alcohol is stored in stainless steel tanks. Because benzyl alcohol oxidizes readily, it is advisable to cover the surface of the liquid with nitrogen.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state colourless liquid
Colour Water-white liquid
Odour Faint aromatic odor
Melting point/ freezing point -15ºC
Boiling point or initial boiling point and boiling range 203-205°C(lit.)
Flammability Combustible.
Lower and upper explosion limit / flammability limit no data available
Flash point 94°C
Auto-ignition temperature 436.11°C
Decomposition temperature no data available
pH A solution in water is neutral to litmus
Kinematic viscosity 5.474 cP at 25°C; 2.760 cP at 50°C; 1.618 cP at 75°C; 1.055 cP at 100°C
Solubility In water:4.29 g/100 mL (20 ºC)
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure 13.3 mm Hg ( 100 °C)
Density and/or relative density 1.045g/mLat 25°C(lit.)
Relative vapour density 3.7 (vs air)
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Oxidizes slowly, therefore remains stable for long time

10.3 Possibility of hazardous reactions

Slight, when exposed to heat or flame ...Attacks plastics. [Handling Chemicals Safely 1980. p. 236]. Acetyl bromide reacts violently with alcohols or water [Merck 11th ed. 1989]. Mixtures of alcohols with concentrated sulfuric acid and strong hydrogen peroxide can cause explosions. Example: an explosion will occur if dimethylbenzylcarbinol is added to 90% hydrogen peroxide then acidified with concentrated sulfuric acid. Mixtures of ethyl alcohol with concentrated hydrogen peroxide form powerful explosives. Mixtures of hydrogen peroxide and 1-phenyl-2-methyl propyl alcohol tend to explode if acidified with 70% sulfuric acid [Chem. Eng. News 45(43):73 1967; J, Org. Chem. 28:1893 1963]. Alkyl hypochlorites are violently explosive. They are readily obtained by reacting hypochlorous acid and alcohols either in aqueous solution or mixed aqueous-carbon tetrachloride solutions. Chlorine plus alcohols would similarly yield alkyl hypochlorites. They decompose in the cold and explode on exposure to sunlight or heat. Tertiary hypochlorites are less unstable than secondary or primary hypochlorites [NFPA 491 M 1991]. Base-catalysed reactions of isocyanates with alcohols should be carried out in inert solvents. Such reactions in the absence of solvents often occur with explosive violence [Wischmeyer 1969].

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

Mixtures with sulfuric acid decompose expliosively at 180°C.

10.6 Hazardous decomposition products

When heated to decomposition it emits acrid smoke and fumes.

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rat oral 1230-3120 mg/kg bw
  • Inhalation: LC100 Rat inhalation 200-300 ppm/8 hr
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available


no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: LC50; Species: Pimephales promelas (fathead minnows); Conditions: static bioassay in Lake Superior water at 18-22°C; Concentration: 770 mg/L for 48 hr
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: EC50; Species: Haematococcus pluvialis (Algae); Concentration: 2600mg/L for 24 hr; Effect: inhibition of photosynthesis /Conditions of bioassay not specified in source examined
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

AEROBIC: Benzyl alcohol underwent 70% of theoretical biological oxygen demand in 5 days under aerobic conditions using an acclimated mixed microbial culture(1). At an initial concentration of 250 ppm, benzyl alcohol achieved 29% of the theoretical BOD after 12 hours in a sewage sludge acclimated to this compound, and 31% oxidation in a sludge acclimated to mandelic acid(2). At an initial concentration of 500 ppm, it achieved 52%, 42%, and 43% of the theoretical BOD in 12 hours using a settled sewage sludge acclimated to phenol, benzoic acid, and catechol, respectively(2). It is listed as a synthetic organic chemical easily biodegradable by biological sewage treatment(3). Benzyl alcohol at an initial concentration of 500 mg/L was shown to undergo rapid oxygen uptake under aerobic conditions when inoculated with municipal sewage sludge(4,5). Benzyl alcohol achieved 48% of the theoretical BOD in 5 days using a sewage sludge seed(6). Benzyl alcohol underwent 60.8% degradation using an industrial sludge inoculum under aerobic conditions in 5 days(7). Benzyl alcohol, present at 100 mg/L, reached 94% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(8). An experimentally-derived first-order aerobic biodegradation rate constant of 0.05 days was reported(9), corresponding to a half-life of about 13 days(SRC).

12.3 Bioaccumulative potential

An estimated BCF of 1.4 was calculated in fish for benzyl alcohol(SRC), using a log Kow of 1.10(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4 Mobility in soil

Experimental Koc values for benzyl alcohol were <5 for three different soils; Apison (0.11% organic carbon), Fullerton (0.06% organic carbon), and Dormont (1.2% organic carbon)(1). An experimental Koc of 15 was determined for benzyl alcohol on a red-brown Australian soil (1.09% organic carbon)(2,3). A log Koc of 1.43 has also been reported(4). According to a classification scheme(5), these Koc values suggest that benzyl alcohol is expected to have very high mobility in soil.

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods


The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN3334 IMDG: UN3334 IATA: UN3334

14.2 UN Proper Shipping Name


14.3 Transport hazard class(es)

ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1

14.4 Packing group, if applicable


14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
benzyl alcohol benzyl alcohol 100-51-6 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%


  • IPCS - The International Chemical Safety Cards (ICSC), website:
  • HSDB - Hazardous Substances Data Bank, website:
  • IARC - International Agency for Research on Cancer, website:
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website:
  • CAMEO Chemicals, website:
  • ChemIDplus, website:
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website:
  • Germany GESTIS-database on hazard substance, website:
  • ECHA - European Chemicals Agency, website:

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
expand collapse
Name: Benzyl alcohol Material Safety Data Sheet
Synonym: Phenylmethanol; Benzene carbinol; Benzenemethanol; Benzoyl alcohol; alpha-Hydroxytoluene; Phenylcarbinol
CAS: 100-51-6
Section 1 - Chemical Product   MSDS Name:Benzyl alcohol Material Safety Data Sheet
Synonym:Phenylmethanol; Benzene carbinol; Benzenemethanol; Benzoyl alcohol; alpha-Hydroxytoluene; Phenylcarbinol

CAS# Chemical Name content EINECS#
100-51-6 Benzyl alcohol >97 202-859-9
Hazard Symbols: XN
Risk Phrases: 20/22

Harmful by inhalation and if swallowed.
Potential Health Effects
Causes severe eye irritation. Causes redness and pain.
Prolonged and/or repeated contact may cause defatting of the skin and dermatitis. Causes redness and pain. May be harmful if absorbed through the skin. Contact with the skin may cause a local anesthetic effect. Material is a weak skin sensitizer.
May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns. May be harmful if swallowed. Ingestion of large amounts may cause CNS depression.
Causes respiratory tract irritation. Material has a very low vapor pressure and inhalation exposures are not expected unless material is heated or misted.
Prolonged or repeated skin contact may cause dermatitis.

  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Blood benzyl alcohol and benzoic acid and urine hippuric acid may be helpful in diagnosis.

  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustible liquid and vapor. Vapors are heavier than air and may travel to a source of ignition and flash back.
Vapors can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use dry chemical, carbon dioxide, or alcohol-resistant foam. Water spray may cause frothing.

  General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation.

Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep away from heat and flame. Avoid breathing vapor or mist.
Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 100-51-6: Russia: 5 mg/m3 TWA Personal Protective Equipment Eyes: Wear chemical splash goggles.
Wear appropriate gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Physical State: Liquid
Color: clear, colorless
Odor: slight aromatic odor - fruity odor
pH: Not available.
Vapor Pressure: 0.0626 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 205 deg C
Freezing/Melting Point: -15 deg C
Autoignition Temperature: 424 deg C ( 795.20 deg F)
Flash Point: 93 deg C ( 199.40 deg F)
Explosion Limits, lower: 1.0 @ 121C
Explosion Limits, upper: 17.8 @ 177C
Decomposition Temperature: Not available.
Solubility in water: Moderately Soluble.
Specific Gravity/Density: 1.045
Molecular Formula: C7H8O
Molecular Weight: 108.14

  Chemical Stability:
Stable under normal temperatures and pressures. Slowly oxidized by atmospheric oxygen. Polymerization may occur in the presence of dissolved ionic (+2) iron and acid.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, hydrogen bromide gas + iron at >100C(exothermic polymerization), Corrosive to iron, steel and aluminum when heated..
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: May occur.

CAS# 100-51-6: DN3150000 LD50/LC50:
CAS# 100-51-6: Draize test, rabbit, skin: 100 mg/24H Moderate; Inhalation, mouse: LC50 = >500 mg/m3; Inhalation, rat: LC50 = >500 mg/m3; Oral, mouse: LD50 = 1360 mg/kg; Oral, mouse: LD50 = 1360 mg/kg; Oral, rabbit: LD50 = 1040 mg/kg; Oral, rabbit: LD50 = 1040 mg/kg; Oral, rat: LD50 = 1230 mg/kg; Oral, rat: LD50 = 1660 mg/kg; Skin, rabbit: LD50 = 2000 mg/kg; Skin, rat: LD50 = 100 pph/90M.
Skin sensitization, guinea pig: Sensitized 1/10.
LCLo: 1000 ppm/8H.
Benzyl alcohol - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

Fish: Fathead Minnow: LC50 = 46.41 mg/L; 96 Hr.; Static, Soft WaterFish: Fathead Minnow: LC50 = 59.30 mg/L; 96 Hr.; Static, Hard WaterFish: Bluegill/Sunfish: LC50 = 25.05 mg/L; 96 Hr.; Static, Hard WaterFish: Goldfish: LC50 = 64.74 mg/L; 96 Hr.; Static, Hard WaterWater flea Daphnia: EC50 = 400.0 mg/L; 48 Hr.; UnspecifiedWater flea Daphnia: EC50 = 23.0 mg/L; 48 Hr.; UnspecifiedBacteria: Phytobacterium phosphoreum: EC50 = 71.4 mg/L; 5,15,30 minutes; Microtox test, 15 degrees Clog Pow:1.1 Fish toxicity: LC50 (48-96hr) fathead minnow 770-460 mg/l, static bioassay at 18-22°C [Verschueren, K. Handbook of Environmental Data of Organic Chemicals

  Dispose of in a manner consistent with federal, state, and local regulations.

Not regulated as a hazardous material.
Not regulated as a hazardous material.
Not regulated as a hazardous material.

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 100-51-6: 1
CAS# 100-51-6 is listed on Canada's DSL List.
CAS# 100-51-6 is listed on Canada's Ingredient Disclosure List.
CAS# 100-51-6 is listed on the TSCA inventory.

NMR Spectrum 1H NMR : 400 MHz in CDCl3
expand collapse
IR Spectrum IR : liquid film
expand collapse
Mass Spectrum Mass spectrum (electron ionization)
expand collapse
Raman Spectrum Raman : 4880 A,100M,liquid
expand collapse
expand collapse
expand collapse
Type of Test
Standard Draize test
Exposure Route
Administration onto the skin
Species Observed
Human - man
16 mg/48H
Toxic Effects
Cosmetics and Toiletries. (Allured Pub. Corp., POB 318, Wheaton, IL 60189) V.91- 1976- Volume(issue)/page/year: 94(8),41,1979
expand collapse
Type of Test
Standard Draize test
Exposure Route
Administration onto the skin
Species Observed
Rodent - rabbit
100 mg/24H
Toxic Effects
Cosmetics and Toiletries. (Allured Pub. Corp., POB 318, Wheaton, IL 60189) V.91- 1976- Volume(issue)/page/year: 94(8),41,1979
expand collapse
Type of Test
Standard Draize test
Exposure Route
Administration onto the skin
Species Observed
Mammal - pig
Toxic Effects
Food and Cosmetics Toxicology. (London, UK) V.1-19, 1963-81. For publisher information, see FCTOD7. Volume(issue)/page/year: 11,1011,1973

Related Compound Information

Coming Soon
Coming Soon
Coming Soon