Isopropyl acetate

CAS No. 108-21-4

Formula: C5H10O2
Basic Info

https://pubchem.ncbi.nlm.nih.gov/compound/isopropyl_acetate#section=Names-and-Identifiers; Isopropyl acetate is an ester, an organic compound which is the product of esterification of acetic acid and isopropanol. It is a clear, colorless liquid with a characteristic fruity odor.
Isopropyl acetate is a solvent with a wide variety of manufacturing uses that is miscible with most other organic solvents, and moderately soluble in water. It is used as a solvent for cellulose, plastics, oil and fats. It is a component of some printing inks and perfumes.
Isopropyl acetate decomposes slowly on contact with steel in the presence of air, producing acetic acid and isopropanol. It reacts violently with oxidizing materials and it attacks many plastics.
Isopropyl acetate is quite flammable in both its liquid and vapor forms, and it may be harmful if swallowed or inhaled.
The Occupational Safety and Health Administration has set a permissible exposure limit of 250 ppm (950 mg/m3) over an eight-hour time-weighted average for workers handling isopropyl acetate.

Formula
C5H10O2
Molecular Weight
102.132
Exact Mass
102.068
LogP
0.9579
PSA
26.3
Synonyms

2-Propyl acetate

i-propyl acetate

iso-propyl acetate

paracetat

Isopropylacetaat

2-acetoxypropane

CH3COOCH(CH3)2

Isopropylacetat

IPAC

Acetic acid, 1-methylethyl ester

Ispropyl acetate

Acetic acid isopropyl ester IPrOAc

FEMA 2926

isopropanol acetate

Acetic Acid Isopropyl Ester

expand collapse

Properties
Appearance & Physical State
colourless liquid with a fruity odour
Density
0.872
Boiling Point
90ºC
Melting Point
-73.4ºC
Freezing Point
-73.4℃
Flash Point
11ºC
Refractive Index
1.377
Water Solubility
2.90 g/100 mL
Stability
Stable. Flammable - note low flash point. Incompatible with strong oxidizing agents, strong acids, nitrates, alkali metals. May attack some plastics and rubber.
Storage Condition
Flammables area
Vapor Density
3.5 (vs air)
Vapor Pressure
47 mm Hg ( 20 °C)
Safety Info
RTECS
AI4930000
Safety Statements
S16-S26-S36
WGK Germany
1
Risk Statements
R11; R36/37/38
HS Code
2915390090
RIDADR
UN 1220
Hazard Class
3
Packing Group
II
Caution Statement
P210; P305 + P351 + P338; P370 + P378; P403 + P235
Hazard Codes
Hazard Declaration
MSDS
SDS 1.0
expand collapse
Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name Isopropyl acetate

1.2 Other means of identification

Product number -
Other names Acetic Acid Isopropyl Ester

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Food additives -> Flavoring Agents
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Flammable liquids, Category 2

Eye irritation, Category 2

Specific target organ toxicity – single exposure, Category 3

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Danger

Hazard statement(s)

H225 Highly flammable liquid and vapour

H319 Causes serious eye irritation

H336 May cause drowsiness or dizziness

Precautionary statement(s)
Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P233 Keep container tightly closed.

P240 Ground and bond container and receiving equipment.

P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.

P242 Use non-sparking tools.

P243 Take action to prevent static discharges.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P264 Wash ... thoroughly after handling.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.

Response

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P370+P378 In case of fire: Use ... to extinguish.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P312 Call a POISON CENTER/doctor/…if you feel unwell.

Storage

P403+P235 Store in a well-ventilated place. Keep cool.

P403+P233 Store in a well-ventilated place. Keep container tightly closed.

P405 Store locked up.

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Isopropyl acetate Isopropyl acetate 108-21-4 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest. Refer for medical attention.

In case of skin contact

Remove contaminated clothes. Rinse skin with plenty of water or shower.

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Rinse mouth. Do NOT induce vomiting. Rest. Refer for medical attention .

4.2 Most important symptoms/effects, acute and delayed

Vapors irritate eyes and respiratory tract; high concentrations can be anesthetic. Liquid irritates eyes but causes no serious injury; may cause dermatitis; no serious effects if swallowed. (USCG, 1999)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

For basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Esters and related compounds/

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Extinguish with dry chem, /alcohol/ foam, or carbon dioxide. Water may be ineffective. Cool exposed containers with water.

5.2 Specific hazards arising from the chemical

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking and spilled liquid in sealable glass containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.

6.3 Methods and materials for containment and cleaning up

1. Remove all ignition sources. 2. Ventilate area of spill or leak. 3. For small quantities, absorb on paper towels. Evaporate in a safe place (such as a fume hood). Allow sufficient time for evaporating vapors to completely clear the hood ductwork. Burn the paper in a suitable location away from combustible materials. Large quantities can be collected and atomized in a suitable combustion chamber.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Fireproof. Separated from oxidants. Cool.STORAGE TANKS ... SHOULD BE SITUATED IN A MOUNDED COMPOUND CONSTRUCTED TO RETAIN MAX QUANTITY OF LIQUID THAT COULD ESCAPE FROM TANKS; DRUMS & OTHER SMALLER RECEPTACLES ... SHOULD BE KEPT IN STOREROOM OF FIRE-RESISTANT CONSTRUCTION WITH MOUNDED & RAMPED DOORWAY TO PREVENT ESCAPE OF SPILT LIQUID. /ESTERS/

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

After reviewing available published literature, NIOSH provided comments to OSHA on August 1, 1988, regarding the "Proposed Rule on Air Contaminants" (29 CFR 1910, Docket No. H-020). In these comments, NIOSH questioned whether the PELs proposed for isopropyl acetate [TWA 250 ppm; STEL 310 ppm] were adequate to protect workers from recognized health hazards.

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state colourless liquid with a fruity odour
Colour Water-white liquid
Odour Aromatic
Melting point/ freezing point -73.4ºC
Boiling point or initial boiling point and boiling range 85-91°C(lit.)
Flammability Class IB Flammable Liquid: Fl.P. below 22.78°C and BP at or above 37.78°C.Highly flammable.
Lower and upper explosion limit / flammability limit Lower: 1.8% by vol @ 38°C; Upper: 8% by vol
Flash point 4°C
Auto-ignition temperature 478.89°C
Decomposition temperature no data available
pH no data available
Kinematic viscosity 0.49 CENTIPOISE @ 25 DEG C
Solubility In water:2.90 g/100 mL
Partition coefficient n-octanol/water (log value) log Kow = 1.02
Vapour pressure 47 mm Hg ( 20 °C)
Density and/or relative density 0.872g/mLat 25°C(lit.)
Relative vapour density 3.5 (vs air)
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

KEEP AWAY FROM HEAT & OPEN FLAME ... Dangerous fire hazard when exposed to heat, flame, or oxidizers. Moderatedly explosive when exposed to heat or flame.The vapour is heavier than air and may travel along the ground; distant ignition possible.ISOPROPYL ACETATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. This compound can react vigorously with nitrates, strong oxidizers, strong alkalis and strong acids. This chemical may also attack some forms of rubber, plastics and coatings. .

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

... CAN REACT VIGOROUSLY WITH OXIDIZING MATERIALS.

10.6 Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rat oral 3.0 g/kg /From table/
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

A screening test using an activated mixed microbial sewage inoculum indicated that isopropyl acetate had a 5 day BOD of 38%(1). Isopropyl acetate, at an initial concn of 0.4-3.2 ug/l, had a 52.3% 5 day BOD when incubated with an acclimated mixed microbial culture(2). In a screening test using a settled sewage seed, 2.5 ppm isopropyl acetate was found to have a 5 day BOD of 12.7%, which increased to 40% after 10 days and 49.1% after 40 days(3). Isopropyl acetate was determined to have a 5 day BOD of 61% using a settled domestic wastewater seed, and BOD's of 72%, 74% and 76% after 10, 15 and 20 days, respectively(4). When the same inoculum was added to synthetic sea water, the 5, 10, 15 and 20 day BOD's were 14%, 39%, 43%, 49%, respectively(4).

12.3 Bioaccumulative potential

An estimated BCF of 2 was calculated for isopropyl acetate(SRC), using a water solubility of 29,000 mg/l(1,SRC) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests that bioconcentration in aquatic organisms is low(SRC).

12.4 Mobility in soil

The Koc of isopropyl acetate is estimated as approximately 15(SRC), using a measured water solubility of 29,000 mg/l(1) and a regression-derived equation(2,SRC). According to a classification scheme(3), this estimated Koc value suggests that isopropyl acetate is expected to have very high mobility in soil(SRC).

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN1220 IMDG: UN1220 IATA: UN1220

14.2 UN Proper Shipping Name

ADR/RID: ISOPROPYL ACETATE
IMDG: ISOPROPYL ACETATE
IATA: ISOPROPYL ACETATE

14.3 Transport hazard class(es)

ADR/RID: 3 IMDG: 3 IATA: 3

14.4 Packing group, if applicable

ADR/RID: II IMDG: II IATA: II

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Isopropyl acetate Isopropyl acetate 108-21-4 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
MSDS
expand collapse
Name: Iso-Propyl Acetate Material Safety Data Sheet
Synonym: 2-Acetoxypropane; 2-Propyl Acetate
CAS: 108-21-4
Section 1 - Chemical Product   MSDS Name:Iso-Propyl Acetate Material Safety Data Sheet
Synonym:2-Acetoxypropane; 2-Propyl Acetate

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
108-21-4 Isopropyl acetate 100 203-561-1
Hazard Symbols: XI F
Risk Phrases: 11 36 66 67

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Prolonged and/or repeated contact may cause defatting of the skin and dermatitis. May cause skin burns. Chronic exposure may cause liver damage.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. Inhalation of vapor may cause respiratory tract irritation.
May cause effects similar to those described for ingestion. May cause narcotic effects in high concentration. Causes irritation of mucous membrane.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. Prolonged or repeated skin contact may cause defatting and dermatitis. Chronic exposure may cause liver damage.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Combustion generates toxic fumes. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Flammable liquid and vapor. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be ineffective. Use water spray, dry chemical, carbon dioxide, or alcohol-resistant foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 108-21-4: United Kingdom, WEL - STEL: 200 ppm STEL; 849 mg/m3 STEL United States OSHA: 250 ppm TWA; 950 mg/m3 TWA Belgium - TWA: 250 ppm VLE; 1055 mg/m3 VLE Belgium - STEL: 310 ppm VLE; 1309 mg/m3 VLE France - VME: 250 ppm VME; 950 mg/m3 VME France - VLE: 300 ppm VLE; 1140 mg/m3 VLE Germany: 100 ppm TWA; 420 mg/m3 TWA Malaysia: 250 ppm TWA; 1040 mg/m3 TWA Spain: 250 ppm VLA-ED; 1060 mg/m3 VLA-ED Spain: 310 ppm VLA-EC; 1315 mg/m3 VLA-EC Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: colorless
Odor: acetic odor
pH: Not available.
Vapor Pressure: 47.5 mm Hg @20C
Viscosity: 0.60mPa.s @20c
Boiling Point: 85 deg C
Freezing/Melting Point: -62 deg C
Autoignition Temperature: 479 deg C ( 894.20 deg F)
Flash Point: 2 deg C ( 35.60 deg F)
Explosion Limits, lower: 1.76
Explosion Limits, upper: 7.2
Decomposition Temperature:
Solubility in water: Slightly soluble in water
Specific Gravity/Density: 0.87
Molecular Formula: CH3COOCH(CH3)2
Molecular Weight: 102.0688

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Stable under normal temperatures and pressures..
Incompatibilities with Other Materials:
Oxidizing agents, bases, acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 108-21-4: AI4930000 LD50/LC50:
CAS# 108-21-4: Draize test, rabbit, skin: 500 mg/24H Mild; Inhalation, rat: LC50 = 50600 mg/m3/8H; Oral, rabbit: LD50 = 6946 mg/kg; Oral, rat: LD50 = 6750 mg/kg; Skin, rabbit: LD50 = >20 mL/kg.
Carcinogenicity:
Isopropyl acetate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3
UN Number: 1220
Packing Group: II
IMO
Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3
UN Number: 1220
Packing Group: II
RID/ADR
Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3
UN Number: 1220
Packing group: II

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or
cracking.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 23 Do not inhale gas/fumes/vapour/spray.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 108-21-4: 1
Canada
CAS# 108-21-4 is listed on Canada's DSL List.
CAS# 108-21-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-21-4 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Spectrum
NMR Spectrum 1H NMR : 90 MHz in CDCl3
expand collapse
IR Spectrum IR : liquid film
expand collapse
Mass Spectrum Mass spectrum (electron ionization)
expand collapse
Raman Spectrum Raman : 4880 A,200 M,liquid
expand collapse

Related Compound Information

PRODUCTS
Coming Soon
SUPPLIERS
Coming Soon
BRANDING
Coming Soon