butyric acid

CAS No. 107-92-6

Formula: C4H8O2
Basic Info

Butanoic Acid, is found in milk, especially goat, sheep and buffalo milk. It can be used for the preparation of various esters, such as methyl butyrate, which has pleasant aromas or tastes and thus can be used as food and perfume additives.

Formula
C4H8O2
Molecular Weight
88.1051
Exact Mass
88.0524
LogP
0.8711
PSA
37.3
Synonyms

n-Butyric acid

Butyric Acid

(3R,4S)-1-Benzoyl-3-(1-methoxy-1-methylethoxy)-4-phenyl-2-azetidinone

Butanoic acid

expand collapse

Properties
Vapor Pressure
1.35mmHg at 25°C
Safety Info
HS Code
2915600000
MSDS
SDS 1.0
expand collapse
Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 10, 2017

Revision Date: Aug 10, 2017

1.Identification

1.1 GHS Product identifier

Product name butyric acid

1.2 Other means of identification

Product number -
Other names Butyric Acid

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Food additives -> Flavoring Agents
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Skin corrosion, Category 1B

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Danger

Hazard statement(s)

H314 Causes severe skin burns and eye damage

Precautionary statement(s)
Prevention

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P264 Wash ... thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P363 Wash contaminated clothing before reuse.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P310 Immediately call a POISON CENTER/doctor/…

P321 Specific treatment (see ... on this label).

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Storage

P405 Store locked up.

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
butyric acid butyric acid 107-92-6 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest. Artificial respiration may be needed. Refer for medical attention.

In case of skin contact

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Rinse mouth. Do NOT induce vomiting. Refer for medical attention .

4.2 Most important symptoms/effects, acute and delayed

Inhalation causes irritation of mucous membrane and respiratory tract; may cause nausea and vomiting. Ingestion causes irritation of mouth and stomach. Contact with eyes may cause serious injury. Contact with skin may cause burns; chemical is readily absorbed through the skin and may cause damage by this route. (USCG, 1999)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist respirations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Activated charcoal is not effective ... . Do not attempt to neutralize because of exothermic reaction. Cover skin burns with dry, sterile dressings after decontamination ... . /Organic acids and related compounds/

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Use water spray, dry chemical, "alcohol resistant" foam, or CO2. Use water to keep fire-exposed containers cool. On large fires, solid streams of water may not be effective.

5.2 Specific hazards arising from the chemical

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2016)

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Personal protection: complete protective clothing including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Collect leaking and spilled liquid in sealable containers as far as possible. Cautiously neutralize remainder with soda lime. Then wash away with plenty of water.

6.3 Methods and materials for containment and cleaning up

Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash or cement powder. Neutralize with agricultural lime (slaked lime), crushed limestone, or sodium bicarbonate.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Separated from strong oxidants, strong bases and food and feedstuffs.Store in cool, dry, well-ventilated location, away from any area where fire hazard may be acute.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state Butyric acid is a colorless liquid with a penetrating and unpleasant odor. Flash point 76.67°C. Corrosive to metals and tissue. Density 8.0 lb /gal.
Colour Oily liquid
Odour Unpleasant, rancid odor
Melting point/ freezing point -17°C(lit.)
Boiling point or initial boiling point and boiling range 163°C
Flammability Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
Lower and upper explosion limit / flammability limit Lower flammable limit: 2.0% by volume; Upper flammable limit: 10.0% by volume
Flash point 75°C(lit.)
Auto-ignition temperature 450°C (USCG, 1999)
Decomposition temperature no data available
pH no data available
Kinematic viscosity 1.426 mPa-s at 25°C
Solubility greater than or equal to 100 mg/mL at 18.89°C
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure 1.35mmHg at 25°C
Density and/or relative density 0.958 at 20°C (USCG, 1999)
Relative vapour density 3.04 (Relative to Air)
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

It has good stability

10.3 Possibility of hazardous reactions

... Combustible liquidBUTYRIC ACID can react with oxidizing agents. Incandescent reactions occur with chromium trioxide above 100°C. Also incompatible with bases and reducing agents. May attack aluminum and other light metals .

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

May attack aluminum or other light metals with formation of flammable hydrogen gas.

10.6 Hazardous decomposition products

Products of combustion include carbon dioxide and carbon monoxide as well as irritating fumes.

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rat oral 8.79 g/kg
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: LC50 Lepomis macrochirus (Bluegill) 200 mg/L/24 hr; static /formulated product
  • Toxicity to daphnia and other aquatic invertebrates: LC50 Daphnia magna (Water flea) 2750 mg/L/24 hr; static /formulated product
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

AEROBIC: At an initial concentration of 100 mg/L, n-butanoic acid displayed a 72% theoretical biological oxygen demand (BODT) after 5 hours when incubated with activated sludge(1,2). n-Butanoic acid at an initial concentration of 5 ppm displayed a BODT of 76.6% in fresh water and 72.4% in sea water after 5 days(3). n-Butanoic acid had a BODT of 17.4%, 23.8%, 26.2%, and 27.7% after 6, 12, 18, and 24 hours, respectively, when incubated with an activated sludge seed at an initial concentration of 500 ppm(4). In a screening study, n-butanoic acid displayed a 46%, 48%, and 58% BODT after 2, 10, and 30 days, respectively, using a sewage seed(5). In a screening study using a sewage seed, n-butanoic acid had a 5 day BODT of 72-78% and a 20 day BODT of 92-99%(6,7). Several other screening studies with activated sludge inoculum have shown that n-butanoic acid is amenable to biodegradation under aerobic conditions(8-10).

12.3 Bioaccumulative potential

An estimated BCF of 3.2 was calculated for n-butanoic acid(SRC), using a log Kow of 0.79(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4 Mobility in soil

The Koc of n-butanoic acid is estimated as 64(SRC), using a log Kow of 0.79(1) and a regression-derived equation(2). Experimental Koc values for n-butanoic acid on a clastic mud (3.5% organic carbon), a lateritic muddy sand (1.3% organic carbon), and a fine carbonate sand (0.17% organic carbon) were 19.1, 27.6, and 14.7, respectively(3). According to a classification scheme(4), these estimated and experimental Koc values suggest that n-butanoic acid is expected to have very high to high mobility in soil. The percent of n-butanoic acid sorbed to a kalonite or montmorillonite clay at 22°C was 14.0% and 19.9% after 48 hours, respectively, which increased to 31.4% and 24.2%, respectively, after 144 hours(5). In a field study in which 100 ppm n-butanoic acid was injected underground, the retardation, relative to the linear ground-water velocity, was calculated to be 3%(6). N-butanoic acid is listed as a compound displaying an L-type adsorption isotherm, indicating that specific binding sites may be involved(7). Experimental studies in indicate that adsorption of n-butanoic acid to moist soil is dominated by attractive forces between the compound and soil and not by hydrophobic interactions(8). The pKa of n-butanoic acid is 4.82(9), indicating that this compound will primarily exist in the anion in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(10).

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN2820 IMDG: UN2820 IATA: UN2820

14.2 UN Proper Shipping Name

ADR/RID: BUTYRIC ACID
IMDG: BUTYRIC ACID
IATA: BUTYRIC ACID

14.3 Transport hazard class(es)

ADR/RID: 8 IMDG: 8 IATA: 8

14.4 Packing group, if applicable

ADR/RID: III IMDG: III IATA: III

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
butyric acid butyric acid 107-92-6 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 10, 2017
Revision Date Aug 10, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
MSDS
expand collapse
Name: n-Butyric acid 99+% Material Safety Data Sheet
Synonym: n-Butanoic Acid, Ethylacetic Acid; Butyric Acid
CAS: 107-92-6
Section 1 - Chemical Product   MSDS Name:n-Butyric acid 99+% Material Safety Data Sheet
Synonym:n-Butanoic Acid, Ethylacetic Acid; Butyric Acid

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
107-92-6 n-Butyric acid 100.0 203-532-3
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May be harmful if swallowed.
Inhalation:
May cause severe irritation of the upper respiratory tract with pain, burns, and inflammation. Causes chemical burns to the respiratory tract.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Use water spray to dilute spill to a non-flammable mixture. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Use water spray to disperse the gas/vapor. Remove all sources of ignition. Use a spark-proof tool. Absorb spill with an alkaline material such as soda ash or lime. Carefully scoop up and place into appropriate disposal container. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from heat and flame. Keep away from sources of ignition. Do not store in direct sunlight. Keep container closed when not in use. Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Local exhaust may be necessary to control concentrations to acceptable levels.
Exposure Limits CAS# 107-92-6: Russia: 10 mg/m3 TWA Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: colorless
Odor: unpleasant odor - putrid odor
pH: Not available.
Vapor Pressure: .43 mm Hg @20C
Viscosity: 1.6 mPas 20 deg C
Boiling Point: 162 - 165 deg C @ 760.00mm Hg
Freezing/Melting Point: -7 - -5 deg C
Autoignition Temperature: 425 deg C ( 797.00 deg F)
Flash Point: 69 deg C ( 156.20 deg F)
Explosion Limits, lower: 2.00 vol %
Explosion Limits, upper: 10.00 vol %
Decomposition Temperature:
Solubility in water: miscible with almost all common organic
Specific Gravity/Density: .9640g/cm3
Molecular Formula: C4H8O2
Molecular Weight: 88.11

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, alkaline materials, oxidizers.
Incompatibilities with Other Materials:
Oxidizing agents, ammonia, sulfuric acid, isocyanates, epichlorohydrin, aliphatic amines, caustics (e.g. ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide).
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 107-92-6: ES5425000 LD50/LC50:
CAS# 107-92-6: Draize test, rabbit, skin: 20 mg/24H Moderate; Oral, rat: LD50 = 2 gm/kg; Skin, rabbit: LD50 = 530 uL/kg.
Carcinogenicity:
n-Butyric acid - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Ecotoxicity:
Fish: Bluegill/Sunfish: LC50 = 200 mg/L; 24 Hr.; UnspecifiedWater flea EC50 = 61 mg/L; 48 Hr.; UnspecifiedBacteria: Phytobacterium phosphoreum: EC50 = 16.9 - 17.2 mg/L; 5,15, 30 Minutes; Microtox test, 15 degrees C

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: BUTYRIC ACID
Hazard Class: 8
UN Number: 2820
Packing Group: III
IMO
Shipping Name: normal-BUTYRIC ACID
Hazard Class: 8
UN Number: 2820
Packing Group: III
RID/ADR
Shipping Name: BUTYRIC ACID
Hazard Class: 8
UN Number: 2820
Packing group: III
USA RQ: CAS# 107-92-6: 5000 lb final RQ; 2270 kg final RQ

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 107-92-6: 1
Canada
CAS# 107-92-6 is listed on Canada's DSL List.
CAS# 107-92-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107-92-6 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Spectrum
NMR Spectrum 1H NMR : 90 MHz in CDCl3
expand collapse
IR Spectrum IR : liquid film
expand collapse
Mass Spectrum Mass
expand collapse

Related Compound Information

PRODUCTS
Coming Soon
SUPPLIERS
Coming Soon
BRANDING
Coming Soon